Last Updated on February 22, 2020 by Ecorf
Okay, so you’ve packed into that dream house you have been saving towards to get for many years. You have reached the best furniture, well-decorated kitchens and lots of amenities to make life beautiful. But one thing dampens your mood and gets you wondering if you didn’t make the wrong decision after all.
There is nothing wrong about living in a house with slanted walls. Humans are adventurists. So, living in a house with sloped/slanted walls doesn’t call for alarm.
However, the primary struggle is on how to hang pictures on a slanted wall. Many homeowners find this difficult to do. You may have asked a couple of friends and found the practical aspect of their suggestions less helpful.
We understand your pains and the distress of not having your mantle of ownership (pictures0 on the walls of your home. If you’re looking for a way to get around this problem and be happy again with the décor of your home, then you need these tips on hanging pictures on a slanted wall.
Table of Contents
1. Use an L-Bracket
You may have lived in the house for some time and got accustomed to the tilted surface. But trust us when we say that walking in every day to meet the wall bare can send chills down your spine. You may feel the ceiling is finally breaking through the defense of the walls, and about to force them to swing down.
Nevertheless, you can spice things up by hanging your picture or any other fanciful piece of art. As a rule, you should consider using an L-bracket to be successful at this.
To begin with, you have to attach the picture or painting by using an L-bracket. This should be placed at the underside of the frame. Proceed to screw the longer side of the bracket into the wall.
The other (side) side of the bracket that forms the shape “L” should be attached to the bottom of the frame. This does not only conceal the bracket but also helps to brace the bottom of the frame. That way, you can be sure that no form of gravity can cause your picture to come crashing to the ground.
2. Security Hangers with T-Screws
Indeed, slanted walls create a cozy atmosphere in the room and the generality of the house where they are applied. They can also create extra work for you because you have to be imaginative to figure out how to hang pictures on a slanted wall.
Without raking your brain any further, you may want to use security hangers with T-Screws to pull off the stunt. It’s interesting to note that these are specially designed artwork-fastening hardware systems that empower you to hang your pictures and artworks in higher places.
Here’s the way to get around it:
- Insert the Brackets and Screws
The first step is to insert the brackets and screws into drywall anchors. These play a vital role because they make it impossible to pull off a frame after hanging it.
- Hang Your Picture
After inserting the brackets and screws, the next step would be to hang your pictures. While at it, ensure that the T-Screws have a firm hold on the frames. That way, you are confident that no form of force or gravity can pull off your pictures from the slanted wall.
3. Self-Adhesive Hook and Loop Tape
Using this trick is another way to beat the challenge of attaching all the four corners of your slanted wall. It can be as easy as running the tape along the length of each side of the frame. It can also be as difficult as securing the other side of the frame in the end.
Without much ado, let us look at how to hang pictures on a slanted wall using a self-adhesive hook and loop tape.
- Run Strips of Tape along the Length of the Frame
There is no need to concentrating your efforts at a particular corner of the frame. All you need do here is t secure the frame in each corner by running longer strips of tape along the length of each side of the frame.
- Apply the Tape in Straight Lines
While you’re running the tape, also ensure that you are applying it in straight lines. This makes it easy to match the tape on the back of the frame.
- Secure the Strip with Staples
The above steps are all you may need to secure the frame on the wall. However, if you need additional security or assurance, then you may consider applying small finishing nails or staples to secure the strip to the wall.
4. Museum Putty
This is also called the “Museum Putty“. The work is to secure the frames on the walls, especially in turbulent periods like earthquakes. Besides, the material used in the Earthquake/Museum Putty has the same consistency as clay.
As a rule, you should test-run the process with an empty frame. Just apply the putty to the back of the frame and attach it to the space you designated on your slanted wall.
5. Attach Keyhole Fasteners to the Frame
This method is one of the oldest ways that homeowners hang pictures on their sloped walls. It is famous for the firm hold.
Note that you would need four (4) keyhole fasteners. That would be attached to each side of the frame. The keyhole is held firm to the frame using screws.
This procedure would guide you:
- Measure Your Picture Frame
Before shopping for the right keyhole to use, you should ensure that you have the accurate measurement of your picture’s frame.
You can use a pencil to mark out four spots. Ensure that you mark 1 inch in from the outer edge and 1/2 inch down from the top. Apply another 1/2 at the bottom, centered across the width and another 1/2 up from the bottom.
- Locate the Studs
The next step is to locate the studs in your sloped ceiling. You can run a stud finder along the ceiling to discover this. Afterward, you have to measure and mark out four spots that would tally with the ones on your picture frame.
Also, ensure that the distance between the hanging spots and the marked spots are the same.
- Attach the Keyhole Picture Hanger
You can now attach keyhole picture hangers to the spots at the back of the picture frame. Ensure that you place the hooks in a way that the most significant parts of the keyholes are faced down.
- Drill a Hole
Drill a small hole in each spot marked on the ceiling. You can then install a pan head screw to the holes.
- Hang Your Picture
With the completion of the above steps, you can then get on to the last lap of hanging your picture on the slanted wall.
Be careful when doing this, and ensure that you line the most significant part of the keyhole to each screw. Also, slide the frame down to lock the screws at the narrow ends. This makes the frame sturdy and less susceptible to fall off the wall.
Final Words on How to Hang Pictures on a Slanted Wall
Have you now seen the reason why you should be appreciative of the slanted walls in your home? It isn’t hard after all to hang your pictures on the walls.
Hopefully, you have gained insight into the ways to hang your pictures on a slanted wall. So, tell your opinion about the ideas we shared on the list. Don’t forget to share these ideas with your loved ones.