Last Updated on February 24, 2020 by Ecorf
The floor needs to be clean at all times. Although we may not dictate how dirt continually comes into the picture at the end of the day after it was cleaned in the morning, it’s still essential to find suitable ways to keep it shining at all times.
Table of Contents
Why You Should be Intentional About the Tile Floor
The tile floor can lend subtle sophistication to the looks of your room, especially when you select one that rhymes with the room’s décor. Nevertheless, you cannot rule out the fact that all that sophistication would begin to lose the significance the moment the floor gets dirty. You may have tried all the ideas that came your way to no end.
That is why the use of vinegar and baking soda has been the “lifesaver for tile floors” in many homes across the globe. The floor does not only get a clean look after the polish but would maintain the sparkling look for long. Therefore, when armed with a bottle of vinegar and baking soda, you can be confident that your floor would be sparkling all the time.
Cleaning Tile Floors with Vinegar and Baking Soda
Vinegar is a versatile ingredient that has “done wonders” in many homes around the world. The application in the cleaning of tile floors is commendable because it is not only gentle enough not to damage the factory finishes of the floor but also useful to remove grime and dirt without hassles.
So, if you’ve been looking for ways to clean your tile floors without breaking a bank and without leaving a trace of grime or some dirt, then the guide below would help you.
Getting the Items Ready
First of all, we need to be sure we’re on the same page. You need to get specific items for cleaning the tile floor with vinegar and baking soda. These items are:
- Brush – The brush would be used to clear out the grouts or the grimes. A grout brush or a scrub brush would be the perfect one for the job.
- Distilled white vinegar
- Baking Soda
- Spray bottle – The spray bottle would be used to add little sprays of the solution to soften the dirt or grime on the surface to soften it. After that, the grout brush or the scrub brush would be used to remove them.
- Hand Gloves – The hand gloves are necessary for people that have sensitive skin that might react to the vinegar and baking soda solution. Even when yours doesn’t, you may still want to wear them anyway.
- Mop/Rag – The role of the mop or rag is for wiping out the excess dirt or grime that may stay back on the floor’s surface after the brushing.
Steps to Use When Cleaning Tile Floors With Vinegar And Baking Soda
Now that we have gotten the items, we need to clean your tile floors, and the next step would be to commence the operation.
Here are the steps you can follow when applying how to clean tile floors with vinegar and baking soda.
- Sweep the Floor Tile
It doesn’t matter if the tile floor had been swept earlier. The moment you’re ready to clean it with the solution, it’s essential to sweep it once again to get rid of the dirt.
- Mix the Solution
It’s time to combine the vinegar and the baking soda to make the solution. It’s worth pointing out that you don’t have to add any amount you deem fit. Instead, ensure that the combinations are of an equal amount.
Additionally and for better results, you may want to combine half a cup of water, half a cup of detergent, and a 1 2/3 cup of baking soda. You can then add two tablespoons of white vinegar to the mixture. Allow the mixture to settle for some minutes before stirring it properly.
The solution, when mixed thoroughly, can then be added to the spray bottle for efficient dissemination.
- Spray the Solution
Spraying the solution demands to spray it directly to the floor where grime and grout are prevalent.
- Scrub and Mop the Floor
The scrub brush or the grout brush comes in handy here to scrub the floor. The rule of thumb is also to use the brush to clean out the grout particles before applying the mop or the rag to clean the tile floor.
You can always make a new solution when the one you’re using begins to collect dirt.
- Rinse off the Vinegar
The last step is to rinse the vinegar properly when you’re through with the cleaning. Note that the possibility of actualizing that is by washing out the vinegar and the baking soda that is left behind on the floor tiles. Effective rinsing can be done by using warm water to do that.
Note: Your efforts at cleaning the tile floor may not come off as expected because some residues tend to be left behind after cleaning the floor. In such a situation, it may seem that all your efforts have come to naught.
If you find yourself in such a dilemma after cleaning your floor tile, then the ideas below would help you in getting over it without hassles:
- Dissolve Baking Soda with Water
The prevention residue after cleaning the tile floor can be done by dissolving the baking soda with water. This should be done at the onset when you are mixing the solution.
- Rinse the Mop Frequently
If the dissolution of the baking soda with water doesn’t pay off, then the second step would be helpful. It involves rinsing the mop with water after cleaning the floor. That is because the chances are high that the mop or rag may have picked up much dirt in the process. So, rinsing it frequently with warm water could be the perfect way to get rid of residue after cleaning your floor tile with vinegar and baking soda.
Clean Your Tile Floors with Vinegar and Baking Soda
The cleaning of the floor tile is one grueling experience many homeowners are not willing to have again. That is because of the “return” of grout and grime to the floor’s surface even after it has been consistently cleaned.
Thankfully, you can break past that barrier when you incorporate vinegar and baking soda into the mix. When you’re ready to do that, you can be sure that the guide above would take you by the hand until your tile floor begins to shine like the sun.